Composite decks have become increasingly popular with homeowners. Their durability, attractiveness, and affordability are some of the reasons that make these decks popular. In addition to durability, you don’t need to stain or paint them after installation. However, you need proper maintenance to keep it in good condition.
So what can you do to maintain your composite deck in perfect condition for long? Well, there are some maintenance tips for a composite material that you should practice. In this guide, we have put together the best maintenance tips for you from trusted professionals at decksforlife.ca
Here are 10 maintenance tips for composite decking
1. Choose the Right Composite Material
The first thing that you need to get right is the quality of the composite material for any outdoor construction. This is important, especially for the homeowners installing composite decks for the first time. It is essential to note that there are various qualities of composite boards in the market. So, if you want to install a long-lasting composite material, then you need to buy the highest quality boards. If you have no idea, you can seek advice from your deck builder. However, check for water resistance features when buying composite material.
2. Clean Up Any Spills Immediately
One of the biggest damages to the composite boards is from spills from food, oil, and grease. If you don’t clean these spills immediately, they are likely to promote the growth of the mold. Spills can also cause staining of the surface and rotting, especially when you leave the spill for long. Besides, spills also make the decking surface look ugly, and that would call for replacement. Therefore, you should clean up any spills on the composite deck immediately to avoid all these damages.
3. Remove Mold Right Away
Mold is one of the biggest threats to any outdoor construction. The accumulation of moisture on the composite deck surface is what causes mold. Mold produces staining on the surface as well as rotting if allowed to settle on the composite board for long. It can also cause nasty smells on the deck if it gets out of control. However, some homeowners make a mistake of removing mold on the upper side and forget the bottom side. Make sure that you are on the lookout for mold so that it does not get out of control.
4. Use the Right Snow Shovels
One of the biggest mistakes that homeowners make is using the wrong snow shovels during winter. To keep your deck in good condition during winter, you need to prevent the snow from building up. However, use the right snow shovel. Do not use metal snow shovel because they cause scratching and gouging. There are plastic snow shovels, which are design for decks. You should also shovel snow as fast, as you can. Always shovel parallel to the deck surface to avoid snagging the edge.
5. Clean the Surface Regularly
Most of the damages that happen to composite boards is due to poor or lack of cleaning. If you clean your deck regularly, then you will be able to deal with the issues of mold, amongst others. However, you should do clean the right way. Use the right products and the right tools. The best way to go about it is to use a spray deck cleaner, followed by gentle rinsing with a pressure washer. Don’t use uncertified chemicals because they might too harsh for the composite materials.
6. Avoid Fire Sources
The composite material is a combination of plastic and wood. Therefore, the presence of fire would cause severe damages. Even a spark of fire on the composite deck can result in severe damages because of the plastic matter. If this material catches fire, it will be challenging to put it off. That is why it is essential to ensure that there is no sources of fire nearby.
7. Regular Inspection
One mistake that some homeowners make is failing to observe their deck inspection schedule. It is through inspection that you will be able to identify some of the damages at an early stage. So, the first thing that you need to do is to have an inspection plan. You can have this plan from the deck builder, who, in most cases, will also offer inspection services. That will enable you to deal with molds and other damages before they can cause any serious damages.
8. Keep the Gaps Clear
The gap between composite must be kept clear. In most cases, leaves, grass, and other debris usually get stuck in these spaces. During fall and summer, these leaves and grass gets wet and thus can promote organic decaying of the deck. They can also promote mold growth and rotting. That is why you should keep these gaps between composite clean, especially during the fall season. If you notice a buildup, use a spatula or a blunt object to remove it.
9. Sweep Regularly
To avoid the accumulation of debris on your composite deck, you should sweep it regularly. In most cases, it is the buildup of debris, such as leaves that promotes mold growth, decay, and sometimes rotting. However, make sure that the kind of broom you are using to sweep does not scratch the surface. By sweeping it regularly, you will also remove pebbles and other organic matters that can cause stains.
10. Proper Ventilation
Ensure proper ventilation for the under and between the composite boards. You can achieve this by clearing the under part. Remove plants that could be growing under the deck as well as other items to keep it clean. Proper ventilation help to avoid dampness, which can promote molds. Proper ventilation also helps to improve the quality of air around the deck.
Proper maintenance of the composite deck is crucial. It will not only maintain whole construction in good condition for long but will also improve the appeal of the deck. However, you must carry out the maintenance process the right way. Sweeping the surface regularly will help prevent most of the deck damages. You must also get a professional inspection schedule from your local decking company. Try the listed maintenance tips for decks made from composite material to keep it in good condition for long.