If you’re planning to go shopping for a new heating and cooling unit, or if you’re thinking of a way to make the current one more effective, here you’ll learn how you can maximize your system.
Below are ways to manage the heat and the cold with your heating and cooling systems:
1. Get A Heating And Cooling Unit
Are your heating and cooling system more than a decade old? Then it’s time to buy a new one. This will help to enhance your house’s energy efficiency and help you save on electricity bills. Remember, the type of heating and cooling system you pick should highly depend on how big your house is, the degree of insulation, and the local environment. You can visit website pages or head out to the shops for your heating and cooling needs. Here are things to consider when choosing and maintaining your unit:
1. Productivity Assessments
Air conditioner productivity estimates how effective a system will cool a particular room or place along with the quantity of electricity required. Regarding air conditioners, there are two standards of productivity: the energy efficiency ratio (EER) and the seasonal energy efficiency ratio (SEER).
The seasonal energy efficiency ratio is calculated by dividing the cooling capacity by the system’s total power intake throughout the warmer part of the year (i.e., cooling season). On the other hand, the energy efficiency ratio estimates the ‘instant’ efficiency instead of measuring during a whole period. For a window air conditioner, use the energy efficiency ratio.
If you opt for a central A/C unit, use the two seasonal energy efficiency ratios and energy efficiency ratios. The greater the seasonal energy efficiency ratio and energy efficiency ratio scores, the more effective the heating and cooling system.
2. Air Source Heat Pumps
These systems merge warming and cooling functionalities. Air source heat pumps (ASHPs) take in heat from the atmosphere to warm your house. The good thing about air source heat pumps is that they can still emit heat even when the conditions are less than 1°C. Therefore, examine how efficient your ASHP is in the cold season.
To help you determine the efficiency of your heat pump, consider the heating seasonal performance factor (HSPF). It’s the proportion of the overall heat produced by a heat pump, divided by the amount of energy used during a certain duration or during normal heating; the higher the ratings, the more efficient the system.
Furnaces rely on gas to generate warmth. The annual fuel utilization efficiency (AFUE) quantifies the volume of heat supplied to your home in relation to the quantity of fuel delivered or going in the furnace. If the annual fuel utilization efficiency figure is high, then it means your system is efficient. Of course, you have to ensure that your furnace is installed properly before even expecting efficiency.
2. System Upkeep
Adhering to a constant upkeep plan can decrease your heating and cooling expenses significantly and extend the lifespan of your unit. Here are the steps you can take:
Focus On Preventive Maintenance
Employ an expert heating, ventilation, and air conditioning specialist to examine your units for appropriate functioning. Air conditioners ought to be examined during the spring season, and furnaces are examined primarily during fall.
Refer To The Owner’s Guidebook
Upon purchasing, make sure your heating and cooling system comes with an owner’s manual that provides information on system upkeep and care.
Dust Or Buy New Filters Regularly
During times of peak usage, dusting or replacing the filters, if necessary, will significantly cut your heating and cooling expenses and extend the lifespan of your heating and cooling system.
Cover Conduit Leakages
Covering the conduits will significantly regulate dust and moisture. Mastic gum and fiberglass mesh are recommended for sealing ducts. Many heating, ventilation, and air conditioning service firms will offer this service at fair prices.
Keep the space around your heating and cooling system or unit clean at all times. Remove all the wild plants and scattered pieces of rubbish, and allow air to flow around the machines.
Mind Your Thermostat
Always remember to fine-tune your thermostat when you’re not in the house and when you go to bed. This will help you save a significant percentage on heating and cooling expenses.
During the winter season, adjust the thermostat if you’re planning to burn the midnight oil and remember to adjust when going to bed. It’s possible to save on costs when you adjust your thermostat during a seven-hour duration of sleep. However, consider your comfort with temperatures below average.
If you decide to travel during summer or leave the house for long hours, adjusting your thermostat will go a long way in saving resources as well. With advancements in technology today, modern and recently developed thermostats can be programmed to switch back to set temperatures before you return home.
3. Determine The Size You Need
The dimensions of your heating or cooling unit will define its capacity to heat or warm your house. It’s worth noting that a sizeable cooling unit can be loud, uncomfortable, and also costly.
A generally accepted estimation is that heating, ventilation, and air conditioning unit ought to offer one mass of cooling for approximately 399 to 499 sq ft of space. But, this estimation depends on several factors, such as weather conditions prevailing in an area in general or over a long period and how good a home is watertight and insulated. Therefore, get help from your supplier in determining the dimensions of the heating and cooling system that’s right for your place.
Look Out For Detached Or Deformed Conduit
An inappropriately attached or deformed conduit can prevent the efficient flow of air in the system.
4. Best Practices For Energy Efficiency
To reduce your utility expenses and improve energy efficiency within your home, adhere to the following practices:
- It’s advisable to ensure the damper is permanently closed when you’re not using the fireplace.
- Throughout the heating season, let in as much sunlight as possible. To decrease heat gain, close the long curtains to prevent the summer sun from heating the room up.
- Ensure the air openings are dirt-free and not obstructed.
In a nutshell, the above information indicates that there’s a lot to know about heating, ventilation, and air conditioning. The above heating and cooling guide ought to provide you with a better understanding of how a heating and cooling system operates as well as the components. Don’t hesitate to always refer to this guide when needed.