Image source: unsplash.com

A Guide to Making CBD Oil at Your Home

While it is true that you can buy your CBD oil in stores like Diamond CBD, where they guarantee legit products, approved by known laboratories, and in varying strengths, for you to perfectly regulate your servings, it is no secret that you can make CBD oil from your abode.

With CBD flowers and other components, you can easily make your own oil-rich in Cannabidiol. In this article, we will explain in detail how you can make CBD oil to treat the different ailments and diseases that you may suffer or that your loved ones may suffer. Many people find it necessary to make their own CBD oil for various reasons, either because it cannot be purchased in their country because they cannot afford one made by a laboratory or simply because they prefer to carry out this process.

Image source: unsplash.com

Before explaining the different steps to make CBD oil, it is necessary to know that the best results through home methods are obtained through the use of alcohol or oils such as olive, coconut, or almond since they are useful and good quality solvents.

You will also come across a third home method. It is not only more expensive but must be done by someone professional because it needs the use of special equipment and carbon dioxide. Using this particular procedure, you can achieve the best results, but they are so complex and costly. It is not widely applied at home.

The uniqueness of the cannabidiol will vary a lot not only on the production method but also on the strength or flower of hemp used. You should, therefore, know the qualities of each flower and thus be able to choose one with high levels of CBD and low in THC.

Image source: unsplash.com
  • How to Make CBD With Coconut Oil
  • To make this oil, you will need:
  • 30g of CBD Flowers
  • 500ml of coconut oil. (It can also be almond or any other vegetable oil).

First, we are going to grind the hemp flowers, spread them on a baking sheet or aluminum tray, take them to the oven for 1 hour at 110ºC in order to obtain decarboxylation. The flowers will turn slightly brown and get a crisp consistency.

In a double boiler, you are going to place a pot or cup with the hemp flowers and the oil on another with two or three fingers of water, put on a low heat for 2 to 3 hours, and continuously verify that it does not exceed 150ºC, If necessary, you can turn off the kitchen for a few moments to lower the temperature a little and avoid the evaporation of the terpenes.

Once the mixture has a color between green and brown, with a filter or sieve, preferably metal, you will filter the oil in order to separate it from the flowers. Store in an airtight container.

The extraction method through alcohol will provide you with a more powerful CBD extract than that obtained through the use of vegetable oils. However, if you are concerned about the chemicals that may be left in the extract through alcohol. It is recommended that you use vegetable oil to make oil rich in CBD.
On the other hand, that oil can be used to prepare meals, which will facilitate the way of consumption, since the flavor is disguised with the flavors of the food.

How to Make Your Own CBD Oil With Olive Oil

Image source: unsplash.com

Olive oil is another ideal option you can use to prepare CBD oil at home easily. The process of making CBD oil at home using olive oil is quite similar to that of coconut oil. Follow the steps we listed in the use of coconut oil and replace it with olive oil, adding the exact measurements.

How to Make CBD Vape Oil

Vaping is the other ideal way to use the cannabis compound. The good thing is you can make your own CBD vape oil at home. There are different items you will require to make your CBD vape oil. They include:

  • Clean syringe
  • Medium pot
  • Glass storage bottle
  • A dropper
  • Small container with a top ( mostly used for heating the vape juice)
  • Pestle and Mortar
  • Gram scale
  • Fine mesh strainer

With the gram scale, you can measure about 0.5g of CBD crystals before placing them in a pestle and mortar. You should then grind it into a fine powder. Measure the perfect PG/VG (propylene glycol versus vegetable glycerin) ratio, which should also include 0.5 to 1ml of terpenes. Your vape juice should be about 30 ml. You can then pour it into a mixing container before adding CBD isolate powder and sealing the jar.

Shake the lid and dip it into a pot of warm water that is boiling at medium to high heat. Remove the container with the vape juice after five minutes and shake it for some moments. Repeat this until the CBD crystals disappear. Let your vape juice cool down for about 30 to 40 minutes. You can pour it into a storage bottle for later use. Once stored, it can last for up to 12 months without losing its potency.

Differences Between Home and Professional Extraction Methods

Image source: unsplash.com

Despite providing the ease of making the amount you want, homemade extraction methods will never have the same quality as a CBD oil produced by a specialized laboratory. In laboratories, they normally use methods that allow knowing the exact concentrations of each cannabis component that may be in an oil form, thus avoiding that there are more levels of psychotropic compounds than of CBD itself.

Another factor in favor of laboratories is that the terpenes are not going to evaporate since they are controlled processes, while with home extraction, you run the risk of losing them. Although CBD oils manufactured by laboratories are more expensive compared to those that you can make at home, they are safer. You should follow the right procedures to have an easy time when making your CBD oil at home.

About Suzan Vega

Suzan Vega

Leave a Reply

Your email address will not be published. Required fields are marked *